This filament is a high-quality easy-to-use impact modified PLA (Poly-Lactic Acid) designed for FFF / FDM 3D printing technology. It is tougher and less rigid than standard PLA with enhanced filament flow and interlayer adhesion making it very user-friendly for printing.
Unique features
- Very easy to print
- Warp-free printing with no deformation after cooling
- Improved flow behavior and inter-layer adhesion
- Good first layer adhesion to various (un)heated print surfaces
- Slightly softer than standard PLA resulting in improved strength and impact resistance
- Almost odorless during processing/printing
- Biodegradable
- Available in a wide variety of vivid opaque colors
- Engineered to comply with food and drink contact standards
General printing guidelines
|
Nozzle size: ≥ 0.15mm |
Layer height: ≥ 0.1mm |
Flow rate: ± 100% |
|
Print temp: ± 180 – 220 °C |
Print speed: Medium |
Retraction: Yes – 5mm |
|
Heat bed: ± 0 – 60 °C |
Fan speed: 50-100% |
Experience level: Beginner |
Note: The above settings are guidelines to help find optimal print settings. These ranges should work for most printers but feel free to experiment outside these ranges as needed.
Filament length
|
Density: 1.24 g/cc |
50 gr coil: ± 16.8m |
0.75 Kg spool: ± 251m |
2.3 Kg spool: ± 771m |
4.5 Kg spool: ± 1509m |
8 Kg spool: ± 2682m |
|
|
Diameter 1.75mm |
Diameter 2.85mm |
50 gr coil: ± 6.3m |
0.75 Kg spool: ± 95m |
2.3 Kg spool: ± 291m |
4.5 Kg spool: ± 569m |
8 Kg spool: ± 1011m |
| ACT | 0 | VIC Regional | 0 |
| NSW Metro | 0 | WA Metro | 0 |
| NSW Regional | 0 | WA Regional | 0 |
| NT Metro | 0 | ACT Remote | 0 |
| NT Regional | 0 | NSW Remote | 0 |
| QLD Metro | 0 | VIC Remote | 0 |
| QLD Regional | 0 | QLD Remote | 0 |
| SA Metro | 0 | TAS Remote | 0 |
| SA Regional | 0 | WA Remote | 0 |
| TAS Metro | 0 | SA Remote | 0 |
| TAS Regional | 0 | NT Remote | 0 |
| VIC Metro | 0 |
