Features:
- Specification compliance: Intel EPS12V
- Forward converter circuit
- High efficiency and reliability for industrial level
- Easy swap connector design
- High reliability ball bearing fan
- Low ripple noise
- Smart Silent Fan Control (S2FC)
- Short circuit protection on all outputs
- Over voltage protection
- Over power protection
- 100% hi-pot test
- 100% burn in high temperature cycled on/off
- PFC harmonics compliance: IEC1000-3-2 / EN61000-3-2 standards
Specifications:
- Dimension: L270 x W100 x H70mm (10.6 x 3.9 x 2.7)
- Fan type: 60 x 60mm
- Connectors: Customized modular cables
Electrical Specifications:
- Input frequency: 50 / 60 Hz
- Inrush current cold start: 100A max.
- Hold up time full load: 16ms typical
- Efficiency 220-240VAC full load: 83% typical
- Efficiency 100-120VAC full load: 80% typical
- Dielectric withstand input to frame/ground: 1800VAC 1sec.
- Dielectric withstand input to output: 1800VAC 1sec.
- Line regulation: +/-1% typical
- Load regulation: +/-5% typical
- Cross regulation: +/-5% typical
- Ripple/noise: 1%
- MTBF full load: >100K hours (Excluding the DC fan)
- Power Factor Correction: Active PFC 99% typical
- Safety: CUL TUV CB CCC
- EMC: CE FCC
Package contents:
- 1x 600W Active PFC F0 2U PSU
| ACT | 0 | VIC Regional | 0 |
| NSW Metro | 0 | WA Metro | 0 |
| NSW Regional | 0 | WA Regional | 0 |
| NT Metro | 0 | ACT Remote | 0 |
| NT Regional | 0 | NSW Remote | 0 |
| QLD Metro | 0 | VIC Remote | 0 |
| QLD Regional | 0 | QLD Remote | 0 |
| SA Metro | 0 | TAS Remote | 0 |
| SA Regional | 0 | WA Remote | 0 |
| TAS Metro | 0 | SA Remote | 0 |
| TAS Regional | 0 | NT Remote | 0 |
| VIC Metro | 0 |
